New - Orbi RBR/RBS 850/860 and 960 series Firmware Version 7.2.7.15 Released

Donawalt

Enhancements: 02/21/2025

Added Router Protection support.
Bug Fixes:

Fixed a WiFi connection stability issue.
Fixed various bugs.
Security Fixes:

This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security

For ALL Regions.

Download Link:

Orbi 850 Series: https://www.netgear.com/support/product/rbk852/#download

Orbi 860 Series: https://www.netgear.com/support/product/rbk862s/#download

Orbi 960 Series: https://www.netgear.com/support/product/rbke962/#download

Please navigate to the link below for step-by-step instructions on how to update your Orbi model system:

https://kb.netgear.com/31573/How-do-I-manually-upgrade-firmware-on-my-Orbi-router-using-orbilogin-co...

https://kb.netgear.com/000037217/How-do-I-check-and-manually-upgrade-the-firmware-on-my-Orbi-satelli...

Be sure to update the RBS FIRST, then the RBR lastly.

I HIGHLY recommend after the FW is loaded on the system and it's back to ready, power OFF all Orbi units and the ISP modem/ONT for 1 minute. Then back ON with the ISP modem/ONT first, then RBR then RBS.

The best advice we can give people is to start a new config, power on one RBS and wait for some SOLID light or most often blue or magenta. And then add the RBS WIRELESSLY via the WebUI. Power off the RBS. Then rinse and repeat with any additional RBS(s). Pair RBS one at a time even if you have more than one. For ethernet connected RBS, after things come up wirelessly, you can move to wired backhaul but don't start with wired backhaul for those RBS that are ethernet connected. Wirelessly connect and sync RBS first before ethernet connecting RBS.

NOTE: Orbi app or the routers web page may not report seeing new FW updates. NG may not push this to their auto update services immediately. User will have the choice to manually update if you want too.

NOTE: The Disable Auto Update feature only prevents ANY new FW from being installed if available. This does NOT prevent the system from checking NG services to see if new FW is available. If new FW is available, this will be displayed as a notification to the user on the RBRs web page only. It will be up to the user to upgrade FW or not.

A factory reset may be needed if problems are encountered after the FW update: https://kb.netgear.com/31486/How-do-I-reset-my-Orbi-system-to-factory-default-settings

This article applies to:

Orbi (5)
RBK852
RBK853
RBK854
RBR850
RBS850
RBK862S
RBK862SB
RBK863S
RBK863SB
RBK864SB
RBR860
RBR860B
RBR860S
RBS860
RBS860B
RBKE962
RBKE963
RBKE963B
RBKE964
RBKE964B
RBRE960
RBRE960B
RBSE960
RBSE960B

antdude

Will 750 (753 to be exact) models be getting any updates or did Netgear drop it? 🙁

Donawalt

I have heard it will come to 750 since it’s the same version. No idea when though.

antdude

Donawalt I have heard it will come to 750 since it’s the same version. No idea when though.

Where did you see/heard that?

Donawalt

antdude

Sorry to get back later, you probably saw by now 7.2.7.15 is out for the 750 series:
https://www.netgear.com/support/product/rbr750/#download

I couldn’t answer your question because I couldn’t 😉

antdude

Hmm, my logged in http://192.168.1.1/UPG_upgrade.htm shows “No New Firmware Available” so far, and its release notes were from 2/28/2025. I think I will wait since I don’t want to deal with new issues if any comes up from the upgrade. Is anyone using this version in this router model yet?

kenward1

Updated my RBR860 2 weeks ago and the router has been lagging ever since and it took my satellites a long time to connect, and they are utilizing a wired connection.